Explore our engineering-grade stainless steel products manufactured to global standards including ASTM A240, ASTM A269, EN 10088-2, and JIS G4304.
A authoritative guide on cold drawing mechanics, metallurgical refinement, dimensional control, and global supply chain integration.
In modern heavy industry and high-precision fluid power systems, standard hot-extruded or as-welded tubing often falls short of meeting rigorous engineering demands. Cold drawn stainless steel tubes represent the pinnacle of dimensional precision and mechanical integrity. The cold drawing process involves pulling a mother tube (seamless or welded) through a hardened tungsten carbide die and over an internal mandrel at ambient temperature.
This plastic deformation work-hardens the material, refining the grain structure along the axial direction, dramatically increasing yield strength, and imparting an immaculate surface finish. By eliminating surface scale and achieving outer diameter (OD) and inner diameter (ID) tolerances as tight as ISO h9 and h10, custom cold drawn tubing eliminates the need for post-procurement machining in critical hydraulic cylinders, instrumentation lines, and aerospace assemblies.
As global industries transition toward higher operating pressures, harsher corrosive media, and strict decarbonization frameworks, the reliance on high-performance alloys has surged. The commercial demand for precision tubing is driven by chemical process plants, green hydrogen transport infrastructure, subsea oil and gas extraction, and high-purity pharmaceutical manufacturing.
To navigate volatile raw material markets and maintain structural compliance, global OEMs and EPC contractors increasingly seek direct partnership with vertically integrated manufacturers. Sourcing mill-traceable cold drawn tubing from verified factories eliminates intermediary markups while guaranteeing compliance with strict international codes such as ASTM A213, ASTM A269, EN 10216-5, and NACE MR0175.
Matching chemical composition and mechanical properties to severe operational environments.
| Steel Grade | Alloy Classification | Key Chemical Elements | Mechanical Strengths (Yield / Tensile) | Primary Industrial Applications |
|---|---|---|---|---|
| SUS304 / 304L | Austenitic Stainless | 18% Cr, 8% Ni (Low C for 304L) | ≥ 205 MPa / ≥ 515 MPa | Food processing, general hydraulic lines, architectural fittings, heat exchangers. |
| SUS316 / 316L | Molybdenum Austenitic | 16-18% Cr, 10-14% Ni, 2-3% Mo | ≥ 220 MPa / ≥ 520 MPa | Marine fittings, chemical processing, pharmaceutical lines, high-purity fluids. |
| Duplex 2205 (UNS S32205) | Austenitic-Ferritic Duplex | 22% Cr, 5% Ni, 3% Mo, 0.16% N | ≥ 450 MPa / ≥ 620 MPa | Oil & gas subsea lines, desalination plants, high-chloride chemical tanks. |
| Super Duplex 2507 (UNS S32750) | Super Duplex | 25% Cr, 7% Ni, 4% Mo, 0.27% N | ≥ 550 MPa / ≥ 750 MPa (PREN ≥ 42) | Offshore platforms, seawater systems, flue gas scrubbing, aggressive acid duty. |
| AISI 310S | High-Temperature Austenitic | 25% Cr, 20% Ni | ≥ 205 MPa / ≥ 515 MPa | Furnace tubes, radiant tubes, heat treatment equipment up to 1150°C. |
| Grade 201 / 430 | Cr-Mn / Ferritic Series | 16-18% Cr, Reduced Nickel | ≥ 275 MPa / ≥ 520 MPa | Indoor structural elements, decorative tubing, automotive exhaust trims. |
Our state-of-the-art facility in Wuxi combines heavy industrial power with smart automation.
From raw coil slitting, flattening, continuous welding to precision plug drawing and bright annealing, every operation is contained under one roof to eliminate supply chain friction.
Offering bright annealed (BA), mechanical polish (No.4, Hairline, 8K Mirror), electropolished (EP) for sub-micron Ra smoothness, and protective powder coatings.
Integrated inline Eddy Current testing, hydrostatic testing up to 300 bar, ultrasonic flaw detection, and positive material identification (PMI) on 100% of heat lots.
Deploying specialized cold drawn tubing across critical infrastructure and extreme operational environments.
High-pressure hydraulic circuits demand uniform wall thickness and zero internal defect. Cold drawn seamless tubes in 316L and Duplex 2205 withstand pulsing pressure spikes up to 600 bar without fatigue failure.
Ultra-high purity (UHP) gas distribution lines require internal surface roughness of Ra ≤ 0.25 µm. Bright annealed and electropolished 316L tubing prevents particulate entrapment and biofilm formation.
Weight reduction paired with extreme temperature stability. Super Duplex 2507 and 310S cold drawn thin-wall tubes maximize thermal transfer efficiency in aerospace heat exchangers and nuclear coolers.
E-E-A-T principles built directly into our manufacturing and verification protocols.
Every batch of cold drawn tubing exported from our Wuxi facilities undergoes rigorous mechanical and chemical verification. We strictly conform to:
To satisfy tier-1 engineering audits, every delivery is accompanied by complete documentation package, ensuring transparency from raw billet to job site installation:
Pioneering next-generation steel drawing methodologies and sustainable manufacturing.
Integration of real-time laser ultrasonic gauging and AI force-feedback sensors on cold drawing benches to maintain OD/ID tolerances within ±0.01mm.
Commercialization of ultra-low nickel, nitrogen-strengthened austenitic grades specially engineered to prevent hydrogen embrittlement in high-pressure gas storage.
100% green-electricity powered bright annealing furnaces and closed-loop pickling acid recycling, achieving near-zero carbon manufacturing for global export markets.
Addressing critical buyer intent queries with authoritative, engineering-first answers.
Hot rolled stainless steel tubing is formed at elevated temperatures (above recrystallization temp), which can leave a surface oxide scale, looser dimensional tolerances (typically ±0.2mm to ±0.5mm), and coarser grain structures. Cold drawn tubing is processed at room temperature through dies. This mechanical drawing process achieves tighter dimensional tolerances (down to ±0.02mm), smoother surface finishes (Ra < 0.4 µm), and higher yield/tensile strength via strain hardening.
Annealed and Pickled (AP) tubing is heat treated in an open atmosphere and then acid-pickled to remove scale, leaving a matte light-gray finish. Bright Annealed (BA) tubing is heat-treated in a controlled atmosphere furnace containing pure hydrogen or dissociated ammonia. This prevents oxidation entirely, resulting in a mirror-like, highly polished surface that minimizes micro-roughness, reduces fluid friction, and eliminates risk of iron contamination in sanitary applications.
Yes. This process produces Cold Drawn Welded (CDW) or Welded Annealed Cold Drawn (WAD) tubing. A high-frequency or TIG welded mother tube is drawn over a plug or mandrel. The heavy mechanical cold work completely recrystallizes the weld seam during subsequent annealing, homogenizing the grain structure so that the weld zone matches the parent metal in strength and corrosion resistance while offering cost savings over raw seamless billets.
Every batch of raw coil or tube hollow is sourced exclusively from certified primary steel mills (Tsingshan, TISCO, POSCO, Baosteel) with raw Mill Test Certificates (MTC). Upon arrival at our Wuxi plant, handheld Optical Emission Spectrometry (OES) and X-ray Fluorescence (XRF) PMI analyzers verify chemical composition before processing. Heat numbers are stamped and tracked through every cold drawing bench and furnace run.
High-precision tubes are vulnerable to surface scratching, bent ends, and saltwater corrosion. We utilize heavy-duty plastic end caps on all tube openings, individual plastic sleeve wrapping, vapor corrosion inhibitor (VCI) paper lining, and export-grade wooden cases or steel-framed bundles tailored for containerized sea freight or air shipment.
Browse additional custom configurations available for immediate worldwide export.
Get direct factory pricing, mill test certificates (EN 10204 3.1), and engineering support from Jiangsu Renzhi Holding Group Co., Ltd. Send your custom dimensions, outer diameter tolerances, wall thickness requirements, and target destination port for a rapid RFQ response.
Manufacturing Base: No.592 Shengan West Road, Huishan District, Wuxi, Jiangsu, China.