Explore our top factory-direct inventory engineered for fluid pipelines, structural architecture, and high-corrosion industrial environments.
A comprehensive guide for procurement engineers, project managers, and metallurgists seeking optimal surface roughness (Ra), pitting corrosion resistance, and aesthetic durability.
Stainless steel is celebrated worldwide for its inherent corrosion resistance, mechanical strength, and architectural versatility. However, the raw mill surface—whether hot-rolled (No.1) or cold-rolled (2B)—is often insufficient for specialized industrial, pharmaceutical, architectural, and sanitary applications. The ultimate corrosion resistance, micro-roughness, cleanability, and visual appeal of stainless steel components are determined primarily by the final surface treatment process.
The corrosion resistance of stainless steel relies on an ultra-thin (1-5 nanometers) chromium-rich oxide film ($\text{Cr}_2\text{O}_3$) that forms spontaneously in the presence of oxygen. Mechanical, chemical, and electrochemical surface treatments manipulate this passive layer to dramatically elevate the Pitting Resistance Equivalent Number (PREN) and decrease micro-porosity where corrosive ions like chlorides ($\text{Cl}^-$) accumulate.
Selecting the precise surface finish requires balancing mechanical friction requirements, optical reflectivity, hygienic cleanability, and manufacturing economics. Below is an engineering breakdown of standard mill finishes and secondary surface enhancements.
No.1 Finish: Hot-rolled, annealed, and descaled. Features a rough, dull surface ideal for industrial heat exchangers and chemical tanks where aesthetic reflectivity is unnecessary.
2B Finish: Cold-rolled, heat-treated, and light skin-passed. Smooth, slightly reflective standard finish for general fabrication.
BA (Bright Annealed): Processed in an oxygen-free controlled atmosphere furnace to maintain a mirror-like bright finish directly from cold rolling.
No.4 Satin Finish: Unidirectional linear grain produced with 150-240 grit abrasives. Popular in commercial kitchen equipment and elevator interiors.
Hairline (HL): Continuous long-line grain providing a refined, low-glare architectural appearance.
8K Mirror Finish: Multi-stage progressive buffing with fine abrasives and polishing compounds, reaching an ultra-smooth specular surface with near-zero visible grain.
Electropolishing (EP): Reverse electrolysis that preferentially removes microscopic high spots, smoothing peaks and valleys, yielding a microscopic Ra < 0.15 μm for semiconductor and bio-pharmaceutical equipment.
Chemical Passivation (ASTM A967): Nitric or citric acid immersion that dissolves free iron contaminations while enriching the chromium ratio ($\text{Cr}/\text{Fe}$) on the outer passive film.
To assist engineering design teams in specifying exact tolerances, the table below maps manufacturing processes to typical surface roughness ($\text{R}_\text{a}$) values, process standards, and primary engineering use cases.
| Finish Designation | Processing Method | Roughness Ra (μm) | Roughness Ra (μin) | Standard Compliance | Primary Application |
|---|---|---|---|---|---|
| No.1 | Hot Rolled, Annealed, Pickled | 3.2 - 6.3 | 125 - 250 | ASTM A240 / EN 10088-2 | Heavy Industrial, Structural Tanks |
| 2B | Cold Rolled, Light Pinch Pass | 0.3 - 1.0 | 12 - 40 | ASTM A480 / JIS G4304 | General Sheet Fabrication, Ducting |
| BA | Bright Annealed in Argon/H2 | 0.1 - 0.2 | 4 - 8 | ASTM A480 | Appliance Trim, Tubing Coils |
| No.4 (Satin) | Mechanical Belt Polish (180 Grit) | 0.2 - 0.6 | 8 - 25 | EN 10088-2 Finish 2J | Food Machinery, Elevators |
| 8K Mirror | Multi-stage Cloth Buffing + Compound | 0.03 - 0.1 | 1.2 - 4 | ASTM A480 Finish No.8 | Architectural Facades, Reflectors |
| Electropolished (EP) | Anodic Chemical Dissolution | 0.05 - 0.2 | 2 - 8 | ASME BPE / ASTM B912 | Pharmaceutical Cleanrooms, Semiconductor |
| PVD Color Coating | Titanium Vapor Deposition Vacuum | Depends on Base | Depends on Base | ISO 9001 Factory Std | Luxury Architecture, Furniture |
How localized industrial clustering, raw material integration, and high-capacity processing deliver unmatched cost efficiencies for global procurement officers.
Located in Huishan District, Wuxi—China's primary stainless steel logistics hub—our facilities maintain direct, long-term procurement agreements with premier tier-1 steel mills including Tsingshan Holding Group, TISCO (Taiyuan Iron & Steel), POSCO, and Baosteel. By sourcing raw master coils directly from smelters, we eliminate intermediary markups, guarantee origin chemical composition, and ensure absolute traceability from liquid metal to finished surface-treated coil or pipe.
Unlike trading companies that outsource slitting, polishing, or tube welding to separate vendors, our Wuxi production complex runs 5 continuous automatic slitting & leveling lines, 6 automated surface polishing systems, 2 high-precision embossing units, and over 80 automated tube welding mills under a unified Quality Management System (QMS). Vertical integration reduces lead times by up to 40% and eliminates transit damage between processing steps.
Exporting custom-finished stainless steel—especially delicate 8K Mirror, Hairline, or PVD coated sheets—requires rigorous protective packaging. Every sheet or coil is wrapped with anti-UV PE/Laser protective film (70 to 100 microns thick), padded with moisture-proof kraft paper, fitted with steel edge protectors, and secured on fumigated ISPM-15 compliant wooden pallets or heavy-duty steel cradles designed for long-haul maritime transport.
Meeting the rigorous technical demands of global EPC contractors, OEM engineers, and international stockholders.
Every shipment is delivered with a complete chemical analysis and mechanical testing report verified under EN 10204 3.1 standards. PMI (Positive Material Identification) spectrographic testing ensures nickel, chromium, and molybdenum contents match contract specifications perfectly.
All surface treatment processes—including degreasing, passivation, and anti-fingerprint (AF) liquid coatings—fully comply with EU REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) and RoHS Directive 2011/65/EU standards, ensuring eco-friendly non-toxic compliance.
Our in-house metallurgical laboratory performs continuous ASTM B117 / ISO 9227 Accelerated Salt Spray Testing, Intergranular Corrosion Tests (ASTM A262 Practice E), and surface profilometer Ra roughness measurements to certify performance before dispatch.
Selecting the appropriate stainless steel alloy is as critical as choosing its surface treatment. Our core production includes:
How custom surface finishes solve specific performance challenges across diversified international industries.
Scenario: Coastal commercial tower in Dubai requiring non-glare, sandstorm-resistant exterior cladding with zero color fading under intense UV exposure.
Solution: Custom SUS316 Cold-Rolled Plates treated with Bead Blasting + PVD Champagne Gold Coating + Anti-Fingerprint (AF) Nano-Clear Sealant. The PVD titanium physical vapor deposition ensures permanent atomic bonding that survived 2,000 hours of UV and salt spray exposure without color shift.
Scenario: Vaccine manufacturing facility in Germany requiring sterile fluid transmission tubes with zero bacterial bio-film adhesion.
Solution: SUS316L Seamless and Welded Pipes subjected to Internal Electropolishing (EP) achieving an internal surface roughness Ra < 0.12 μm, followed by Citric Acid Passivation compliant with ASME BPE standards.
Scenario: Seawater filtration plant in Singapore experiencing severe pitting corrosion on standard 316 piping manifolds.
Solution: Super Duplex 2507 Pipes processed with Pickling Acid Passivation (ASTM A380) to eliminate heat tint scale from welding and maximize the chromium-molybdenum passive film thickness.
Scenario: Commercial oven and conveyor manufacturer in North America seeking durable, easily cleanable stainless surfaces that resist grease staining.
Solution: SUS304 2B Sheets converted via precision grinding to No.4 Satin Finish with hydrophobic Anti-Fingerprint Coating, reducing cleaning chemical consumption by 50% for end-users.
Emerging technologies shaping the future of industrial stainless steel surface finishing.
Traditional electropolishing generates hazardous acid waste. Modern manufacturing centers in China are leading the shift toward closed-loop electrolyte recycling and zero-discharge rinse water systems, satisfying global ESG (Environmental, Social, and Governance) compliance standards.
Replacing chemical etching with high-precision fiber laser texturing enables micro-patterning at the nanometer scale. This technology creates superhydrophobic surfaces (lotus effect) that repel liquids and particulates without chemical sealants.
Integrating high-speed line-scan cameras with deep-learning AI algorithms on production lines allows real-time detection of micro-scratches, pinholes, or uneven polish grain at rolling speeds exceeding 100 meters per minute.
Understanding base raw metal fluctuations, processing premiums, and volume discount structures.
Pricing for custom surface-treated stainless steel consists of two primary components: Base Alloy Cost (dictated by London Metal Exchange / SHFE nickel, chromium, and molybdenum spot prices) and Secondary Surface Processing Surcharge. Below is an estimated baseline pricing reference for wholesale export orders.
| Product / Surface Finish | Grade Basis | Thickness Range | Estimated Processing Premium ($/MT) | Estimated FOB Price Range ($/MT) |
|---|---|---|---|---|
| Hot Rolled No.1 Coil/Plate | SUS 304 | 3.0mm - 20.0mm | Standard Base Mill | $2,100 - $2,350 |
| Cold Rolled 2B Sheet | SUS 304 | 0.5mm - 3.0mm | +$80 - $120 / MT | $2,220 - $2,480 |
| No.4 / Satin Brushed Finish | SUS 304 | 0.6mm - 3.0mm | +$150 - $220 / MT | $2,350 - $2,650 |
| 8K Mirror Polished | SUS 304 | 0.8mm - 3.0mm | +$350 - $500 / MT | $2,550 - $2,900 |
| PVD Color Coating (Gold/Black) | SUS 304 8K Base | 0.8mm - 2.0mm | +$600 - $900 / MT | $2,900 - $3,500 |
| 316L Industrial Welded Pipe | SUS 316L | Sch 10S - Sch 40S | Pickled & Passivated | $3,400 - $3,900 |
| 201 Decorative Pipe (Glossy) | Grade 201 | 0.4mm - 1.5mm OD | Polished 400 Grit | $1,350 - $1,650 |
Detailed technical answers to common questions regarding custom surface finishes, quality assurance, and international delivery.
No.4 finish features short, interrupted linear abrasive grain lines created by 150-240 grit belts. Hairline (HL) finish exhibits continuous, unbroken parallel grain lines running along the entire length of the sheet or tube. Hairline offers a more uniform, sophisticated matte-metallic appearance preferred in architectural cladding and luxury elevator cabs.
Mechanical polishing leaves microscopic abrasive scratches, embedded particles, and directionally stressed micro-peaks where moisture and chlorides can collect. Electropolishing chemically dissolves these high spots, producing a microscopically featureless, feature-smooth surface. Furthermore, electropolishing preferentially extracts iron atoms from the surface, leaving a high concentration of chromium that thickens the protective passive film.
No. Physical Vapor Deposition (PVD) deposits thin films of Titanium Nitride (TiN), Titanium Carbide (TiC), or Zirconium Nitride (ZrN) in a high-vacuum chamber at high temperatures. The colored layer becomes atomically bonded with the stainless steel substrate. It will not peel, flake, or fade under direct UV exposure, making it vastly superior to painted or electroplated finishes.
We issue Mill Test Certificates (MTC) according to EN 10088 and EN 10204 3.1 with every batch. The certificate details heat numbers, chemical composition (spectrometer tested), mechanical yield and tensile strength, hardness (HB/HRB), surface roughness Ra profiling results, and passivation compliance certification.
We supply specialized Fiber Laser Protective Films (70μm to 120μm thickness) engineered specifically to withstand fiber laser cutting nitrogen pressure without burning or leaving adhesive residue upon removal. Easy-peel and anti-UV films are also available upon request.
Every wooden crate or pallet is reinforced and lined with heavy-duty plastic vapor corrosion inhibitor (VCI) packaging, desiccant bags to absorb ambient humidity during equator sea crossings, and fully enclosed water-resistant kraft paper wrapping. Steel edge protectors guard against strap damage during crane loading.
Select from our certified industrial supply line available for immediate custom processing and global shipping.
Submit your material specifications, target roughness (Ra), dimensions, and quantity. Our technical metallurgy team will respond within 24 hours with an official quote and MTC compliance report.
Connect with Sales Engineers