Made from austenitic stainless steel such as 304 and 316, it forms a dense oxide film on the surface, resisting corrosion from acids, alkalis, and salts, ensuring a long service life.
The stamped sheet maintains high tensile strength (≥515MPa for 304 material) and is resistant to deformation.
By adjusting the open area ratio (the proportion of hole area to the plate surface) and hole patterns, it achieves various functions such as ventilation and heat dissipation, filtration and sieving, sound absorption and noise reduction, anti-slip and light transmission.
Smooth surface (with treatments such as 2B, BA, mirror finish, brushed, etc.), resistant to dust accumulation, and low maintenance costs.
| Material Grade | Feature | Applicable Scenarios |
|---|---|---|
| 304 | General-purpose, containing 18% Cr and 8% Ni, resistant to atmospheric corrosion | Interior decoration, kitchen equipment, general industrial screens, building curtain walls |
| 316 | Containing molybdenum (Mo 2-3%), resistant to chloride corrosion (pitting) | Coastal architecture, chemical equipment, seawater desalination, and high-sanitation food and pharmaceutical areas |
| 201 | High in manganese, low in nickel, with relatively weak corrosion resistance and low cost | Dry indoor environment, short-term protection, non-load-bearing decoration |
0.1mm ~ 20mm (0.5mm ~ 6.0mm for general industrial use).
0.2mm ~ 300mm (Aperture typically needs to be ≥ plate thickness; micro-hole processing requires special techniques).
Geometric holes: round holes, square holes, oval holes, hexagonal holes, triangular holes (most commonly used).
Special-shaped holes: diamond, plum blossom, fish scale, louver, cross, and pattern holes.
Straight (90°), staggered (60°, 45°), gradient arrangement, irregular artistic arrangement.
Common flat panels are 1m×2m, 1.22m×2.44m, or 1.5m×3m; rolled plates have a width of ≤1.5m and can extend up to tens of meters in length.
Produce high-precision hard alloy molds based on hole patterns.
Use CNC turret punch or laser cutting composite machine for high-speed punching.
After stamping, the sheet metal may deform and needs to be leveled by a leveling machine before cutting according to size.
Punching edges are prone to burrs and require polishing, vibration grinding, or chemical polishing treatment.
Optional mirror polishing, wire drawing, sandblasting, electroplating, PVD coloring or spraying.
Exterior walls and curtain walls, interior partitions, ceilings, railings, screens (with both shading and ventilation).
Petrochemical sieve plate, mining vibrating screen, food machinery filter screen, pharmaceutical equipment filter element.
Highway sound barriers, machine room sound-absorbing panels, cooling tower fillers.
Equipment ventilation hood, machine tool protective door, safety fence.
Kitchen drain rack, storage hole board, anti-slip pedal, furniture panel.
Grade 316 stainless steel is ideal for coastal or harsh marine environments because it contains 2% to 3% molybdenum, offering superior resistance against chloride corrosion and pitting. For general atmospheric outdoor use, Grade 304 provides reliable durability and protection.
In standard mechanical punching processes, the aperture diameter is typically equal to or greater than the plate thickness (≥ plate thickness) to prevent tooling damage. For micro-hole requirements where the diameter is smaller than the thickness, specialized techniques like laser drilling are utilized.
High-speed punching introduces internal stress that can warp the sheet metal. To maintain flatness, sheets undergo a precision machine leveling process directly after stamping, restoring perfect flatness before secondary cutting or fabrication.
Available hole types include standard geometric shapes (round, square, oval, hexagonal, triangular) and special patterns (diamond, plum blossom, fish scale, louver). These can be configured in 90° straight, 60°/45° staggered, gradient, or custom irregular artistic arrangements.
A wide variety of functional and architectural finishes are available, including 2B finish, BA, mirror polishing, wire drawing/brushing, sandblasting, electroplating, PVD coloring, and custom powder coatings or spraying.
Common standard flat panel dimensions include 1m×2m, 1.22m×2.44m, and 1.5m×3m. We also provide coiled/rolled perforated sheets with widths up to 1.5m that can span continuous lengths of dozens of meters, all customizable upon request.