The microstructure of 2507 steel consists of approximately 50% ferrite and 50% austenite. This "dual phase" structure combines the high strength of ferritic steel with the excellent toughness of austenitic steel, while possessing excellent resistance to stress corrosion cracking.
Its corrosion resistance is mainly due to the high content of alloying elements, especially the "three highs" design of high chromium, high molybdenum, and high nitrogen.
Main components: Cr (24-26%), Ni (6-8%), Mo (3-5%), N (0.24-0.32%).
Cr |
Ni |
Mo |
N |
C |
Si |
Mn |
P |
S |
24-26% |
6-8% |
3-5% |
0.24-0.32% |
≤0.03% |
≤0.80% |
≤1.2% |
≤0.035% |
≤0.02% |
Corrosion resistance advantage: It has strong resistance to pitting and crevice corrosion caused by chlorides (such as seawater and saltwater), with a corrosion resistance equivalent (PREN) usually greater than 40, much higher than ordinary 316L stainless steel.
The strength of 2507 steel is about twice that of ordinary austenitic stainless steel (such as 304, 316), which allows for the use of thinner plates under the same load, achieving lightweight design.
Due to its excellent performance, 2507 duplex stainless steel plate is mainly used in the following harsh environments:
We use high-precision rolling mills to ensure that the thickness of each steel plate is uniform and consistent, with tolerances controlled within national standards, providing dimensional assurance for your processing.
After a complete annealing and acid washing process, the surface is clean, without scratches, roller marks, oxidation or color difference, presenting a uniform metallic luster.
Strict composition control and production processes ensure that the mechanical properties of the material (such as hardness and tensile strength) are stable and reliable, with good batch consistency.
We can provide customized cutting services such as tablets and strips, reducing your processing steps and saving costs and time.
① 0.3mm-0.8mm: Suitable for decorative surfaces, shielding covers, lightweight shells, etc. that do not require high strength.
② 1.0mm-1.5mm: Suitable for most chassis cabinets, advertising letters, door and window accessories, and medium strength structural components.
③ 2.0mm-3.0mm: Suitable for load-bearing structures, equipment bases, heavy-duty frames, and other applications that require high strength.
① 201 stainless steel is suitable for dry indoor environments and mildly corrosive environments. In humid environments with high chloride ion content such as coastal areas and chemical plants, it is recommended to use 304 or 316L stainless steel with stronger corrosion resistance.
② Please use specialized tools and lubricants during processing to achieve the best results.
③ If you have special requirements for surface conditions such as mirror finish or brushed finish, please communicate in advance.
2507 steel features a super biphasic structure consisting of approximately 50% ferrite and 50% austenite. This combination offers double the strength of standard austenitic steels like 304 or 316, along with exceptional toughness and high resistance to stress corrosion cracking.
Its premium corrosion resistance is driven by high levels of chromium (24-26%), nickel (6-8%), molybdenum (3-5%), and nitrogen (0.24-0.32%). This composition yields a Pitting Resistance Equivalent Number (PREN) higher than 40, outperforming standard 316L stainless steel.
In the solid solution state, it achieves a tensile strength of ≥ 730 MPa, yield strength of ≥ 550 MPa, an elongation rate of ≥ 25%, and a hardness level of ≤ 290 HB.
Yes, long-term exposure to temperatures exceeding 300 ℃ should be avoided. High-temperature exposure (including heat from welding) can lead to brittle phase precipitation, which reduces both material toughness and overall corrosion resistance.
Due to its high work-hardening tendency, specialized tools and proper lubricants are highly recommended. For welding, it is advised to use matching welding consumables (such as ER2594) and strictly monitor heat input levels.
For light, decorative, or shielding applications, 0.3mm to 0.8mm is ideal. For medium-strength parts like chassis cabinets, 1.0mm to 1.5mm is best. For heavy structural load-bearing frames, choose a thickness between 2.0mm and 3.0mm.