Made from austenitic stainless steel such as 304 and 316, it forms a dense oxide film on the surface, resisting corrosion from acids, alkalis, and salts, ensuring a long service life.
The stamped sheet maintains high tensile strength (≥515MPa for 304 material) and is resistant to deformation.
By adjusting the open area ratio (the proportion of hole area to the plate surface) and hole patterns, it achieves various functions such as ventilation and heat dissipation, filtration and sieving, sound absorption and noise reduction, anti-slip and light transmission.
Smooth surface (with treatments such as 2B, BA, mirror finish, brushed, etc.), resistant to dust accumulation, and low maintenance costs.
| Material Grade | Feature | Applicable Scenarios |
|---|---|---|
| 304 | General-purpose, containing 18% Cr and 8% Ni, resistant to atmospheric corrosion. | Interior decoration, kitchen equipment, general industrial screens, building curtain walls. |
| 316 | Containing molybdenum (Mo 2-3%), resistant to chloride corrosion (pitting). | Coastal architecture, chemical equipment, seawater desalination, and high-sanitation food and pharmaceutical areas. |
| 201 | High in manganese, low in nickel, with relatively weak corrosion resistance and low cost. | Dry indoor environment, short-term protection, non-load-bearing decoration. |
Plate thickness: 0.1mm ~ 20mm (0.5mm ~ 6.0mm for general industrial use).
Aperture range: 0.2mm ~ 300mm (Aperture typically needs to be ≥ plate thickness; micro-hole processing requires special techniques).
Types of die holes:
Geometric holes: round holes, square holes, oval holes, hexagonal holes, triangular holes (most commonly used).
Special-shaped holes: diamond, plum blossom, fish scale, louver, cross, and pattern holes.
Arrangement methods: straight (90°), staggered (60°, 45°), gradient arrangement, irregular artistic arrangement.
Standard dimensions: Common flat panels are 1m×2m, 1.22m×2.44m, or 1.5m×3m; rolled plates have a width of ≤1.5m and can extend up to tens of meters in length.
Produce high-precision hard alloy molds based on hole patterns.
Use CNC turret punch or laser cutting composite machine for high-speed punching.
After stamping, the sheet metal may deform and needs to be leveled by a leveling machine before cutting according to size.
Punching edges are prone to burrs and require polishing, vibration grinding, or chemical polishing treatment.
optional mirror polishing, wire drawing, sandblasting, electroplating, PVD coloring or spraying.
Architectural decoration: exterior walls and curtain walls, interior partitions, ceilings, railings, screens (with both shading and ventilation).
Industrial filtration: Petrochemical sieve plate, mining vibrating screen, food machinery filter screen, pharmaceutical equipment filter element.
Architectural decoration: exterior walls and curtain walls, interior partitions, ceilings, railings, screens (with both shading and ventilation).
Environmental noise reduction: highway sound barriers, machine room sound-absorbing panels, cooling tower fillers.
Mechanical protection: equipment ventilation hood, machine tool protective door, safety fence.
Home life: kitchen drain rack, storage hole board, anti slip pedal, furniture panel.
304 stainless steel is a versatile and general-purpose choice, containing 18% Chromium and 8% Nickel, ideal for interior decoration and general industrial use. 316 stainless steel contains 2-3% Molybdenum, which makes it highly resistant to chloride corrosion and pitting, making it suitable for marine, coastal, and chemical environments.
As a general rule, the hole aperture (diameter) should be equal to or greater than the plate thickness to prevent mold damage during the stamping process. For micro-hole requirements where the aperture is smaller than the thickness, special fabrication techniques are required.
Yes. We support a wide range of geometric hole shapes (round, square, oval, hexagonal, triangular) as well as special-shaped patterns (diamond, plum blossom, fish scale, louvers, crosses, and customized artistic designs) with various arrangement options.
We offer multiple surface treatment options to enhance aesthetics and durability, including mirror polishing, wire drawing (brushed), sandblasting, electroplating, PVD coloring, and protective spraying.
Stamping can cause stress and minor warping in the metal sheet. To resolve this, we process the stamped sheets through a professional leveling machine to restore flatness before cutting and edge finishing.
Yes. When paired with sound-absorbing materials, perforated sheets are highly effective for environmental noise reduction. They are commonly used in highway sound barriers, machine room sound-absorbing panels, and cooling towers.