The microstructure of 2507 steel consists of approximately 50% ferrite and 50% austenite. This "dual phase" structure combines the high strength of ferritic steel with the excellent toughness of austenitic steel, while possessing exceptional resistance to stress corrosion cracking.
Its superior corrosion resistance is primarily achieved through a high concentration of alloying elements, specifically engineered around a high chromium, high molybdenum, and high nitrogen formula.
Main Elements: Cr (24-26%), Ni (6-8%), Mo (3-5%), N (0.24-0.32%).
| Cr | Ni | Mo | N | C | Si | Mn | P | S |
| 24-26% | 6-8% | 3-5% | 0.24-0.32% | ≤0.03% | ≤0.80% | ≤1.2% | ≤0.035% | ≤0.02% |
Corrosion Resistance Advantage: Delivers exceptional resistance to pitting and crevice corrosion caused by chlorides (seawater, brine environments). Its Pitting Resistance Equivalent Number (PREN) typically exceeds 40, significantly surpassing standard 316L stainless steel.
The yield and tensile strength of 2507 steel is nearly double that of conventional austenitic grades (such as 304 and 316). This allows engineers to specify thinner wall thicknesses and plates under identical design loads, achieving high-efficiency lightweight designs.
Due to its comprehensive strength and corrosion performance, 2507 duplex stainless steel plate is extensively deployed across critical harsh environments:
Ocean Engineering: Offshore oil & gas platforms, seawater desalination systems, subsea pipelines, and marine equipment.
Petrochemical Industry: Heat exchangers, process storage tanks, pressure vessels, and transfer piping handling highly corrosive media (chloride ions and sulfides).
Environmental Protection: Flue gas desulfurization (FGD) systems, industrial scrubbers, and high-load sewage treatment facilities.
Mechanical Components: Heavy-duty structural parts, shafts, and impellers requiring combined high load capacity and anti-corrosion protection.
We utilize high-precision rolling mills to guarantee uniform and consistent thickness across every plate, maintaining tolerances strictly within national standards.
Processed through thorough annealing and acid pickling to ensure surfaces are clean, free of roller marks, scratches, or oxidation, delivering a uniform metallic finish.
Rigorous chemical composition management and controlled thermal treatment ensure mechanical properties (tensile and hardness) remain dependable with tight batch-to-batch consistency.
Full custom sizing including shearing, strip cutting, and plate sectioning to directly support fabrication requirements, saving project lead time and processing costs.
• How to choose thickness?
• Important Notice:
1. Grade 201 is suited only for dry indoor and mildly non-corrosive conditions. For marine or chemical settings with chloride exposure, 304, 316L, or 2507 Super Duplex must be specified.
2. Always use sharp, heavy-duty specialized tooling and adequate coolant/lubricants during machining.
3. Inquire ahead for custom surface finishes such as No.4 brushed or mirror polished (8K).
2507 (UNS S32750) is a super duplex stainless steel composed of roughly 50% austenite and 50% ferrite. It integrates high mechanical yield strength with outstanding resistance to pitting, crevice corrosion, and chloride stress cracking.
2507 provides roughly double the mechanical yield strength of 316L and has a PREN value > 40 (compared to ~25 for 316L), making it vastly superior in aggressive marine and high-chloride environments.
The long-term operating temperature should remain under 300 °C. Exceeding this temperature range causes microstructural precipitation of brittle intermetallic phases (σ-phase), which reduces mechanical toughness and corrosion resistance.
Matching super duplex consumables like ER2594 or 25.10.4.L are standard recommendations to maintain the 50/50 phase balance and preserve corrosion resistance in the weld metal and heat-affected zone.
Yes. With a yield strength of ≥ 550 MPa (nearly twice that of standard austenitic grades), engineers can design thinner cross-sections and plates without sacrificing load-bearing capacity.
We supply standard pickled & annealed finishes as well as custom processing services including precision laser/strip cutting, shearing, and specified surface finishes upon request.