Custom Cold Rolled Steel Sheet Metal Supplier & Pricelist

Precision Metallurgical Engineering, High-Strength Sheet Metal Solutions & Transparent B2B Wholesale Pricing for Global Industrial Fabricators.

Featured Product Catalog (Part I)

Cold Rolled Steel Sheets & Precision Tubes

Explore our top-tier cold rolled stainless steel sheets, structural tubing, and strip coils engineered to rigorous ASTM, EN, and JIS tolerances.

China Cold Rolled Stainless Steel Sheet

China Cold Rolled Stainless Steel Sheet - High Strength & Corrosion Resistant

View Product & Price
Wholesale 201 Stainless Steel Strip Coil

Wholesale High-Quality 201 Stainless Steel Strip/Coil Supplier

View Product & Price
CE SUS304 304L Stainless Steel Pipe

CE Certification SUS304/304L Low Carbon Stainless Steel Pipe

View Product & Price
Custom 201 Stainless Steel Pipe

Custom China 201 Stainless Steel Glossy Tubes for Guardrails

View Product & Price
Prime Quality 201 Stainless Pipe

Prime Quality 201 Stainless Steel Handrail Pipe

View Product & Price
CE 316L Stainless Steel Sheet

CE Certified 316L Corrosion Resistant Stainless Steel Sheet

View Product & Price
201 Stainless Steel Strip

High-Quality 201 Stainless Steel Coil with Discount Pricelist

View Product & Price
Decorative Stainless Steel Pipe

Exquisite Stainless Steel Decorative Pipe Supplier

View Product & Price
Industry Intelligence

Global Cold Rolled Steel Sheet Metal Dynamics & B2B Procurement

Understanding material yield, surface reflectivity standards, and microstructural uniformity across international industrial supply chains.

State of Global Industrial Demand

Cold rolled steel sheet metal represents the cornerstone of modern precision engineering. Unlike hot-rolled counterparts processed above recrystallization temperatures, cold-rolled sheet undergoes intensive room-temperature tandem mill compression. This physical mechanical reduction increases yield strength via strain hardening by up to 20–30%, yielding ultra-tight gauge tolerances ($\pm 0.02\text{ mm}$), superior flatness, and pristine surface finishes suitable for direct paint application, electroplating, or bright polishing.

Global consumption across automotive lightweighting, HVAC ducting, server chassis manufacturing, and architectural cladding demands seamless metallurgical consistency to prevent springback variations during high-speed automated press stamping.

Cost Drivers & Procurement Complexity

Navigating custom cold rolled steel procurement requires analyzing key variables: raw coil substrate grade selection (commercial quality SPCC/DC01 vs. deep-drawing SPCEN/DC06 or austenitic 304/316L stainless), temper pass parameters, surface texture roughing ($R_a$ values), anti-fingerprint oil coatings, and slitting width tolerances.

Procurement managers frequently experience budget overruns due to undisclosed alloy surcharges, thickness tolerance penalties, or inadequate seaworthy packaging. Our mill eliminates opacity through factory-direct pricing formulas aligned with London Metal Exchange (LME) and Shanghai Futures Exchange indexes.

±0.01 mm
Precision Thickness Control
85%
Max Cold Reduction Ratio
100%
Eddy Current & Ultrasonic Tested
50+
Global Export Destinations
Technical Specifications

Metallurgical Matrix: Cold Rolled Carbon & Stainless Alloys

Comprehensive mechanical and chemical property comparison to guide precise material selection for deep drawing, roll forming, and structural fabrication.

Steel Grade Standard Alloy Classification Yield Strength ($R_{e}$, MPa) Tensile Strength ($R_{m}$, MPa) Elongation ($A_80$, %) Deep Draw Value ($r_{90}$) Typical Surface Finish Primary Industrial Use
JIS G3141 SPCC / EN DC01 Commercial Quality Carbon Steel 130 – 280 270 – 410 ≥ 28 1.2 – 1.4 Matte Finish ($R_a$ 0.6–1.2μm) General stamping, cabinets, electrical enclosures
JIS G3141 SPCD / EN DC03 Drawing Quality Carbon Steel 120 – 240 270 – 370 ≥ 34 1.5 – 1.7 Bright / Oiled Finish Automotive oil pans, moderate press components
JIS G3141 SPCEN / EN DC06 Extra Deep Drawing Interstitial-Free 110 – 180 270 – 350 ≥ 41 ≥ 2.1 Smooth / Anti-Fingerprint Complex auto body panels, severe stretch forming
AISI 201 (UNS S20100) Low-Nickel Austenitic Stainless ≥ 310 ≥ 685 ≥ 40 1.1 – 1.3 2B, BA, No.4 Brushed Decorative tubing, handrails, indoor architecture
AISI 304 / 304L (UNS S30400/03) 18/8 Chrome-Nickel Stainless ≥ 205 / ≥ 170 ≥ 515 / ≥ 485 ≥ 40 1.3 – 1.6 2B, BA, 8K Mirror, Hairline Food processing equipment, chemical vats, HVAC
AISI 316 / 316L (UNS S31600/03) Molybdenum-Bearing Stainless ≥ 205 / ≥ 170 ≥ 515 / ≥ 485 ≥ 40 1.3 – 1.5 2B, BA, Pickled No.1 Marine fittings, aggressive chemical tanks, medical
UNS S32750 (2507 Duplex) Super Duplex Stainless Steel ≥ 550 750 – 1000 ≥ 15 N/A (High Strength) Hot/Cold Rolled Pickled Offshore oil & gas, desalination plants, pressure vessels

Pro Tip for Metallurgy Engineers: When selecting custom cold-rolled sheet metal for deep drawing applications, evaluate the anisotropic Plastic Strain Ratio ($r$-value) and Strain Hardening Exponent ($n$-value). Higher $r$-values signify superior resistance to wall thinning under deep press drawing tension.

Engineering Roadmap

Precision Cold Rolling Process Technology & Manufacturing Roadmap

From hot-rolled pickle band substrate to ultra-flat temper-rolled sheet: step-by-step quality control at every stage.

5-Stage Cold Reduction Workflow

Stage 1: Continuous Hydrochloric Acid Pickling

Hot-rolled master coils pass through automated acid baths to completely strip oxide scale (iron oxides $\text{Fe}_2\text{O}_3$ and $\text{Fe}_3\text{O}_4$), followed by multi-stage deionized water rinsing and electrostatic oiling.

Stage 2: 5-Stand Tandem Cold Mill Reduction

Hydraulic Automatic Gauge Control (AGC) and X-ray thickness gauges continuously adjust roll gaps under multi-thousand-ton pressures, achieving thickness reductions up to 85% with micron-level precision.

Stage 3: Hydrogen Bright Annealing (BA)

Work-hardened steel passes through a 100% pure hydrogen or cracked ammonia atmosphere furnace at 750°C–1050°C. Recrystallization restores ductility without causing surface oxidation or decarburization.

Stage 4: Temper Rolling / Skin Pass Mill

A light reduction (0.5%–2.0%) eliminates yield point elongation (preventing stretcher strain marks during stamping), adjusts final flatness, and imparts the exact requested surface roughness ($R_a$).

Stage 5: Tension Leveling & Automated Precision Slitting

In-line laser scanning measures residual stress while tension levelers eliminate center buckles and wave edges. Precision rotary shears slit coils to custom customer widths down to $\pm 0.05\text{ mm}$.

Future Tech Roadmap (2025–2030)

Our research & development institute continuously pushes cold-rolled sheet metal boundaries. Key ongoing technology integrations include:

AI-Driven Closed-Loop Roll Gap Feedback

Neural network models process 1,000 sensor readings per second to dynamically anticipate strip crown variations and adjust work roll bending instantly.

Zero-Carbon Hydrogen-Fueled Annealing Lines

Transitioning all bell and continuous furnace heating systems to green hydrogen, cutting embodied carbon footprint per ton of steel sheet by 68%.

Ultra-Thin Micro-Gauge Rolling (< 0.10mm)

Pioneering 20-high Sendzimir mill passes to mass-produce foil-thin cold rolled stainless steel sheets for hydrogen fuel cell bipolar plates and battery casings.

Supply Chain Excellence

China Factory Hub Advantages & Global Supply Chain Resilience

Leveraging the world’s most integrated steel cluster in Jiangsu & Wuxi to provide unmatched pricing, rapid lead times, and reliable delivery.

Strategic Cluster

Wuxi Mill Strategic Proximity

Headquartered in Wuxi, Jiangsu—China’s primary stainless and precision steel hub—our mill connects directly with primary smelters including Tsingshan, TISCO, Baosteel, and POSCO. This raw coil alliance guarantees continuous master slab feedstock availability even during global supply crunches.

Logistics Speed

Direct Deep-Water Port Shipping

Located within 120 km of Shanghai Port and Ningbo Port, our facility provides rapid container loading and break-bulk vessel dispatch. Standard stock items ship within 5-7 business days, while custom engineered cold rolled orders average 12-18 days turnaround.

Agile Processing

In-House Vertical Integration

By unifying hot coil pickling, cold reduction tandem rolling, bright annealing, 8K mirror polishing, laser cutting, and tube welding under one roof, we eliminate third-party processing markups and retain 100% total quality control.

Global Engineering Use-Cases

Localized Application Scenarios Across Key Global Markets

Tailoring custom cold rolled steel sheet specifications to regional standards, climate requirements, and manufacturing norms.

North America: Automotive Stamping & Heavy HVAC Enclosures

In the US and Canadian markets, strict compliance with ASTM A1008 / A240 standards is paramount. High-speed stamping operations require sheet metal with minimal gauge variation to prevent die jamming.

  • Automotive Outer Panels: Extra deep drawing IF steel (DC06 / SPCEN) with oiled surface for draw strain prevention.
  • Commercial Rooftop HVAC: Cold rolled 304/316L stainless steel sheets with 2B finish providing corrosion immunity against acid rain and snow melt chemicals.

European Union: Medical Cabinetry & Precision Machinery

European fabricators operating under EN 10131 / EN 10088-2 demand ultra-flat sheets with strict ROHS/REACH chemical compliance for cleanroom and pharmaceutical deployment.

  • Medical & Food Grade Equipment: AISI 316L cold rolled plate featuring Ra < 0.4μm smooth finish to eliminate bacterial trap sites.
  • Precision Machine Housings: DC01 / DC04 cold rolled steel laser-cut blanks optimized for high-power fiber laser cutting without edge burrs.

Middle East: Coastal Architecture & Desalination Facilities

Operating in hyper-saline coastal environments and extreme temperature fluctuations (UAE, Saudi Arabia, Qatar) demands elevated Pitting Resistance Equivalent Number (PREN).

  • Architectural Curtain Walls: Cold rolled 304/316 8K Mirror and PVD Color Coated sheets resisting high UV degradation and sand abrasion.
  • Desalination & Chemical Ducts: Super Duplex 2507 cold rolled plates providing extreme chloride pitting immunity ($PREN ≥ 42$).

Southeast Asia: High-Density Consumer Electronics & Hardware

Rapidly expanding electronics manufacturing hubs in Vietnam, Thailand, and Malaysia require micro-gauge precision strip coil with anti-fingerprint coatings.

  • Server Chassis & HDD Enclosures: SPCC / SECC cold rolled strip with electro-galvanized coating and conductive chromate-free passivator.
  • Furniture & Decorative Railings: Cold rolled 201/304 decorative tubing engineered for seamless bending without micro-cracking.
Transparent Commercial Structure

Custom Cold Rolled Steel Sheet Pricelist & Cost Factor Architecture

Understand how steel chemistry, processing passes, surface treatments, and order volume shape your total land procurement cost.

Material Category / Grade Standard Thickness Range Standard Width Options Surface Finish FOB China Benchmark Price Range (USD / Metric Ton)* Minimum Order Quantity (MOQ)
Commercial Carbon Steel (SPCC / DC01) 0.30 mm – 3.00 mm 1000mm, 1219mm, 1500mm, Slit Strip Oiled / Dry Matte Finish $620 – $780 / MT 5 Metric Tons
Deep Drawing Carbon Steel (SPCEN / DC06) 0.40 mm – 2.50 mm 1219mm, 1500mm, Custom Cut Blanks Anti-Fingerprint / Oiled $710 – $890 / MT 5 Metric Tons
Austenitic Stainless 201 Series 0.30 mm – 3.00 mm 1000mm, 1219mm, Slit Strip Coil 2B, BA, No.4 Hairline $1,150 – $1,380 / MT 3 Metric Tons
Standard Stainless AISI 304 / 304L 0.40 mm – 6.00 mm 1219mm, 1500mm, 2000mm, Sheet 2B, BA, 8K Mirror, Embossed $1,980 – $2,350 / MT 2 Metric Tons
Marine Stainless AISI 316 / 316L 0.50 mm – 6.00 mm 1219mm, 1500mm, Custom Cut Sheet 2B, Pickled No.1, BA $2,850 – $3,400 / MT 2 Metric Tons
Super Duplex Steel 2507 (UNS S32750) 1.00 mm – 10.00 mm 1500mm, 2000mm, Heavy Plate Descaled / Pickled Finish $4,900 – $6,200 / MT 1 Metric Ton

*Disclaimer: Benchmark pricing subject to alloy element market fluctuations (Nickel, Molybdenum, Chromium, Carbon Steel Scrap). Contact our sales engineers for real-time firm binding quotations valid for 7 calendar days.

1. Thickness & Gauge Surcharges

Thinner gauges (< 0.50mm) require multiple cold rolling passes and intermediate annealing cycles, incurring small-gauge processing extras.

2. Surface Finishing Treatment

Specialized finishes such as 8K Mirror polishing, PVD titanium color plating, custom embossing, or PVC protection film coating add direct labor and machine-hour value.

3. Precision Slitting & Blanking

Tighter width slitting tolerances ($\pm 0.05\text{ mm}$) and precision laser cut-to-length sheet squaring involve specific blade setup labor and scrap material loss factor allowance.

Featured Product Catalog (Part II)

Coil, Perforated Mesh & Super Duplex Offerings

Explore our specialized heavy-duty hot rolled coils, perforated stainless sheets, and marine-grade duplex steel plates.

Custom Hot Rolled Stainless Steel Coils

Custom Hot Rolled Stainless Steel Coils for Heavy-Duty Use

View Product & Price
SUS304 Stainless Cold Rolled Plate

Wholesale SUS304 Stainless Steel Cold-Rolled Food Grade Plate

View Product & Price
CE Perforated Stainless Steel Sheet

CE Certification Perforated Stainless Steel Sheet Mesh

View Product & Price
SUS304 304L Stainless Pipe

SUS304/304L Low Carbon Stainless Steel Pipe Factory Quotes

View Product & Price
2507 Super Duplex Steel Plate

CE Certification 2507 Super Duplex Steel Plate Supplier

View Product & Price
Hot Rolled Stainless Coils

China High-Quality Hot Rolled Stainless Steel Industrial Coils

View Product & Price
Perforated Stainless Sheet

Wholesale Perforated Stainless Steel Architectural Mesh

View Product & Price
201 Stainless Steel Coil

Wholesale High-Quality 201 Stainless Steel Strip/Coil Factory

View Product & Price
Rigorous QA Protocol

Quality Compliance & Seaworthy Export Protection

Ensuring full traceability, mechanical compliance certificates, and zero-defect transit to international destinations.

EN 10204 3.1 / 3.2 Mill Certification

Every shipment is dispatched with an official Mill Test Certificate (MTC) documenting exact heat chemical ladle analysis, yield strength, tensile testing, elongation, and grain size verification.

Third-Party Quality Inspection

We support complete third-party inspection (SGS, Bureau Veritas, TUV, Intertek) prior to port loading, verifying coating thickness, visual surface flatness, and ultrasonic flaw detection.

Heavy-Duty Seaworthy Export Packaging

Sheet metal packages are wrapped with anti-rust vapor corrosion inhibitor (VCI) paper, steel corner protectors, heavy-duty wooden skids, and high-tensile strapping to withstand long ocean transits.

Buyer Assistance

Frequently Asked Questions (FAQ) - Cold Rolled Sheet Metal

Expert responses to critical B2B sourcing questions regarding tolerances, material selection, pricing formulas, and custom options.

What is the structural difference between cold rolled steel sheet metal and hot rolled steel sheet?

Hot rolled steel is rolled at high temperatures (above 1,700°F / 925°C), which causes surface scaling and relaxed dimensional tolerances as the steel cools. Cold rolled steel begins as hot-rolled pickled band but is processed further at room temperature through tandem rolling mills. Cold rolling increases tensile and yield strength by up to 20–30% through work hardening, yields significantly tighter thickness tolerances (down to ±0.01mm), and produces a smooth, polished surface finish ideal for painting or precision stamping.

Which cold rolled grade should I specify for deep press drawing: SPCC, SPCD, or SPCEN?

For standard shallow forming, cabinet bending, or flat panel work, SPCC / DC01 commercial quality is the most cost-effective solution. If your press shop performs moderate drawing, oil pans, or dished shapes, choose SPCD / DC03. For extreme deep drawing involving severe wall tension without risk of splitting or thinning, specify SPCEN / DC06 (Interstitial-Free steel), which exhibits high plastic strain ratios ($r_{90} \ge 2.1$).

How do you prevent yield point elongation (stretcher strain marks) on cold rolled sheets?

During the final manufacturing stage, our factory subject annealed cold-rolled coils to a controlled temper pass (skin pass) rolling reduction (0.5%–2.0%). This light pass eliminates the yield point plateau in carbon steel, preventing Lüders lines (stretcher strain marks) from appearing on the surface during customer press forming and stamping operations.

What surface finish options are available for custom cold rolled stainless steel sheet metal?

We supply cold rolled stainless steel sheets in multiple mill and polished finishes: 2B (standard smooth cold-rolled), BA (Bright Annealed mirror-like finish), No.4 / Hairline (brushed directional grain for appliances), 8K Mirror (high-reflectivity polished finish for architecture), and custom Embossed / Perforated textures for non-slip or decorative cladding.

How is custom cold rolled steel sheet metal pricing calculated for international export orders?

Wholesale steel contract pricing follows a structured formula: Base Substrate Metal Index Price + Gauge Surcharge + Alloy Element Surcharge (for stainless grades) + Surface Finish Processing Fee + Custom Slitting/Cutting Charges + Seaworthy Packing Cost. Discounts are automatically applied for full-container-load (FCL) orders of 25+ Metric Tons per specification.

What export documentation and material compliance certifications accompany the shipments?

All shipments include complete EN 10204 3.1 Mill Test Certificates (MTC) containing detailed chemical ladle analysis (C, Mn, P, S, Cr, Ni, Mo), mechanical yield/tensile/elongation values, hardness readings, and batch heat numbers. We also provide Certificate of Origin (Form E, Form F, CO), Commercial Invoice, Packing List, and Bill of Lading.

Ready to Optimize Your Cold Rolled Steel Supply Chain?

Send your exact gauge, alloy grade, surface finish, and target port requirements to our metallurgical engineering team. Receive custom binding quotations within 24 hours.

Request Real-Time Quotation Download Technical Whitepaper