Direct mill sourcing from Wuxi processing hub. Fully certified to ASTM A240, EN 10088-2, and JIS G4304 specifications with complete surface finish customization.
A comprehensive breakdown of surface roughness (Ra), reflectivity percentages, processing methodologies, and mechanical implications across mill standards.
The global baseline standard for cold-rolled stainless sheet steel. Produced by cold rolling followed by continuous annealing and acid pickling, then given a final light rolling pass through polished skin-pass rolls.
Cold-rolled material heat-treated in a controlled atmosphere furnace containing inert gas (hydrogen or nitrogen). This prevents oxidation during annealing, preserving the ultra-smooth cold-rolled surface finish without chemical pickling.
Created by abrasive processing using defined grit belts (typically 150 to 320 grit). Hairline finishes feature continuous linear directional polish lines, while No.4 delivers short, uniform directional grain patterns.
Cold rolling induces severe plastic deformation, altering the microscopic grain structure of austenitic steel grades (such as SUS304 and SUS316L). When paired with skin-passing or bright annealing, the passive chromium oxide ($Cr_2O_3$) film achieves maximum chemical homogeneity, yielding corrosion resistance vastly superior to hot-rolled No.1 surfaces. For marine or high-chloride duty, ensuring an optimized skin-pass passivates pitting nucleation sites.
| Finish Code | Processing Route | Roughness Average ($Ra$) | Reflectivity % | Standard Equivalents | Corrosion Suitability |
|---|---|---|---|---|---|
| 2B | Cold Roll + Anneal + Pickle + Skin Pass | 0.10 – 0.50 µm | 30% - 50% | ASTM A480 No. 2B / EN 2B | High (Standard Industrial) |
| BA | Cold Roll + Bright Anneal in $H_2/N_2$ atmosphere | 0.05 – 0.15 µm | 75% - 90% | ASTM A480 No. 2D / EN 2R | Superior (Ultra-Clean) |
| No.4 (Satin) | Mechanical Polishing with 150–240 Grit Abrasive | 0.20 – 0.60 µm | 15% - 30% | ASTM A480 No. 4 / EN 2J | Moderate (Architectural) |
| HL (Hairline) | Continuous Unidirectional Abrasive Grinding | 0.15 – 0.40 µm | 20% - 35% | ASTM A480 Hairline / EN 2K | Moderate (Decorative) |
| 8K Mirror | Multi-stage Fine Polishing with $Fe_2O_3$ Compound | < 0.02 µm | > 95% | ASTM A480 No. 8 / EN 2P | High (Requires Clean Maintenance) |
How Jiangsu Renzhi Holding Group leverages direct primary mill feedstock, integrated processing clusters, and high-speed logistics to drive down total cost of ownership (TCO) for global enterprise buyers.
We source primary hot-rolled black coil directly from Asia’s premier stainless steel producers, including Tsingshan, TISCO, POSCO, and Baosteel. This raw material security delivers pristine melt-lot chemistry, predictable mechanical properties, and zero scrap-re-melt contamination.
By housing 5 automatic flattening and slitting lines, 6 automated surface polishing lines (No.4, HL, 8K Mirror), 2 pattern embossing lines, and 80+ high-frequency welded tube mills in Wuxi, we eliminate middleman markups and reduce transit damage risks.
Situated within 150 km of Shanghai and Ningbo deep-water sea ports, our Wuxi factory provides rapid vessel staging. Products feature export-grade wooden-case packaging, edge protection, PVC coating, and desiccant-shielded anti-rust wrapping.
Unlocking transparency in cold-rolled stainless steel pricing dynamics, alloy surcharges, processing add-ons, and volume forecasting models for international purchasing managers.
Stainless steel baseline prices fluctuate continuously based on global raw material commodity exchanges (LME, SHFE). Understanding the components of a factory quote ensures accurate budget modeling:
Procurement teams across Europe, North America, and Southeast Asia face shifting trade landscapes. Strategic procurement requires multi-faceted risk management:
How next-generation coatings, green acid-free passivation, physical vapor deposition (PVD), and automated optical defect detection are revolutionizing stainless steel sheet production.
Application of hydrophobic and oleophobic ceramic nano-coatings over No.4, Hairline, or BA sheets. Prevents oil adhesion, drastically cuts maintenance costs in public elevators, and enhances corrosion resistance in saline atmospheres.
Physical Vapor Deposition (PVD) ion-plating technology deposits titanium nitride (TiN) film onto 8K mirror or hairline sheets. Yields vibrant, fade-resistant finishes including Gold, Rose Gold, Champagne, Black Titanium, and Sapphire Blue without hazardous chemical electroplating.
Real-time visual monitoring installed directly on our continuous skin-pass and slitting lines. AI-driven camera visual software scans 100% of sheet surface area, detecting microscopic pinholes, roller marks, oil spots, or micro-scratches down to 0.05mm at line speeds up to 200 m/min.
Matching specific cold-rolled steel grades and surface finishes to harsh operating environments, international building codes, and demanding industrial processing specs.
Recommended Spec: Grade SUS304 / 316L, Hairline / No.4 finish with 100-micron PE laser protective film.
Exterior architectural curtain walls require low reflectivity to avoid urban light pollution while offering maximum atmospheric corrosion resistance against sulfur dioxide ($SO_2$) and coastal salt spray. Unidirectional Hairline cold-rolled panels ensure thermal expansion stability and crisp visual panel flatness.
Recommended Spec: Grade SUS304L / 316L, BA (Bright Annealed) or 2B finish, inner weld bead rolled flat.
Sterile processing vessels and fluid delivery lines demand surface roughness ($Ra$) below 0.4 µm to prevent bacterial attachment and bio-film accumulation. Bright Annealed cold-rolled strip formed into ultra-low carbon welded pipe provides smooth clean-in-place (CIP) performance.
Ensuring complete compliance with international steel codes, material certification, and destructive/non-destructive testing protocols prior to container dispatch.
Every lot shipped by Jiangsu Renzhi Holding Group is accompanied by an official EN 10204 3.1 inspection certificate issued by our certified metallurgical laboratory. Includes exact ladle chemical composition (XRF/ICP), mechanical yield strength ($R_{p0.2}$), tensile strength ($R_m$), elongation ($A_5$), and Rockwell/Vickers hardness values.
Our processing management systems and products maintain full compliance with key global quality frameworks:
Quality assurance steps performed on-site before packing:
Explore our full range of cold-rolled stainless steel products, custom slit coils, and decorative tubes manufactured to strict dimensional tolerances.
Expert technical answers covering custom finish options, minimum order quantities (MOQs), surface roughness testing, export packaging, and price quote mechanisms.