Browse our certified mill-direct stainless steel hot rolled strips, welded pipes, sheets, and coils engineered to ASTM A240, EN 10088-2, and JIS G4304 global standards.
Hot rolled stainless steel strip is manufactured by processing stainless steel slabs at elevated temperatures (typically exceeding 1100°C to 1250°C) through continuous roughing and finishing mills. This hot-deformation process reshapes the internal crystal grain structure, yielding high-ductility, stress-relieved metal suitable for heavy structural fabrication, cold re-rolling, pipe forming, and pressure containment.
At Jiangsu Renzhi Holding Group Co., Ltd. (operating our primary processing & distribution center in Wuxi, Jiangsu), our hot rolled stainless steel strip production leverages premium slab inputs sourced directly from state-of-the-art melt shops including Tsingshan, TISCO, POSCO, and Baosteel. Hot rolled strip—often referred to as No. 1 finish or Black/Pickled strip—serves as the critical backbone for downstream re-rolling, tube welding, stampings, and structural steelwork.
Information Gain Focus: Unlike standard commercial steel coil, industrial-grade stainless hot rolled strip requires rigorous control over chromium carbide precipitation during inter-pass cooling. By maintaining precise thermodynamic control during hot rolling, Renzhi ensures optimized phase balances in austenitic, ferritic, and duplex grades, reducing edge-cracking during subsequent custom slitting or deep drawing.
Selecting the correct stainless steel grade demands an exact understanding of alloying balances. Below is our engineering baseline matrix comparing primary hot rolled strip grades supplied to international buyers:
| Grade (UNS / EN) | Alloy Structure | Chromium (Cr) % | Nickel (Ni) % | Molybdenum (Mo) % | Yield Strength Rp0.2 (MPa) | Tensile Strength Rm (MPa) | Key Corrosion Index |
|---|---|---|---|---|---|---|---|
| 201 (S20100) | Cr-Mn Austenitic | 16.0 – 18.0 | 1.0 – 3.5 | — | ≥ 275 | ≥ 620 | Moderate indoor exposure |
| 304 (S30400) | Classic 18/8 Austenitic | 17.5 – 19.5 | 8.0 – 10.5 | — | ≥ 205 | ≥ 515 | PREN ~ 19.0 |
| 304L (S30403) | Low-Carbon Austenitic | 17.5 – 19.5 | 8.0 – 12.0 | — | ≥ 170 | ≥ 485 | Resists sensitized IGC |
| 316L (S31603) | Mo-Bearing Austenitic | 16.0 – 18.0 | 10.0 – 14.0 | 2.0 – 3.0 | ≥ 220 | ≥ 520 | PREN ~ 25.0 (Chloride Ready) |
| 310S (S31008) | High-Temp Austenitic | 24.0 – 26.0 | 19.0 – 22.0 | — | ≥ 205 | ≥ 515 | Oxidation resistance to 1150°C |
| 430 (S43000) | Ferritic (Nickel-Free) | 16.0 – 18.0 | ≤ 0.75 | — | ≥ 205 | ≥ 450 | Ferromagnetic, Nitric Acid resistant |
| Duplex 2205 (S32205) | Austenitic-Ferritic 50/50 | 22.0 – 23.0 | 4.5 – 6.5 | 3.0 – 3.5 | ≥ 450 | ≥ 650 | PREN ~ 35.0 (SCC Immune) |
| Super Duplex 2507 | Super Duplex | 24.0 – 26.0 | 6.0 – 8.0 | 3.0 – 5.0 | ≥ 550 | ≥ 750 | PREN ≥ 42.0 (Aggressive Offshore) |
As global industries transition toward decarbonization, lightweight structural design, and extreme-environment reliability, the hot rolling process for stainless steel strips is undergoing transformative technological evolutions.
Direct strip casting bypasses conventional slab reheating furnaces and roughing stands by solidifying liquid stainless steel directly into 1.5mm–4.5mm strip. This cuts energy consumption by over 75% while mitigating macro-segregation of alloying elements like Molybdenum and Nickel.
Thermomechanical Controlled Processing (TMCP) combined with micro-alloy additions (Niobium, Titanium, Vanadium) promotes ultrafine grain structure. This process grants hot rolled 304L and 316L strips superior yield strength without compromising cryogenic toughness.
Integrating real-time laser profile meters and hydraulic AGC on 1500mm hot strip tandem mills guarantees thickness tolerances within ±0.03mm across the entire length of a 20-ton coil strip, eliminating gauge variation during tube manufacturing.
In alignment with European CBAM (Carbon Border Adjustment Mechanism) and global Net-Zero initiatives, leading Chinese stainless steel conglomerates (including Renzhi’s raw material partners) are transitioning toward Electric Arc Furnace (EAF) recycling powered by green hydrogen and renewable energy. This clean energy metallurgy reduces the embodied carbon footprint of hot rolled 304 and 316L strip by up to 40% compared to blast-furnace/AOD routes, giving overseas fabricators a vital competitive edge in sustainable procurement audits.
Located in Huishan District, Wuxi—the undisputed capital of China's stainless steel processing and distribution sector—Renzhi Holding Group bridges primary steel melting with precision downstream engineering.
By operating 5 automatic flattening & slitting lines, 6 automated surface polishing lines (No.1, 2B, BA, No.4, hairline, 8K mirror), 2 embossing lines, and over 80 welded pipe mills under one management system, we eliminate external subcontractor markups and quality bottlenecks.
Direct mill contract allocations with Tsingshan, TISCO, POSCO, and Baosteel ensure continuous master coil supply even during global nickel volatility. We maintain over 35,000 metric tons of standing hot rolled coil inventory in Wuxi.
Every hot rolled strip lot undergoes spectral PM1 chemical validation, ultrasonic flaw detection, intergranular corrosion testing per ASTM A262 Practice E, and mechanical tensile/hardness tests recorded directly onto EN 10204 3.1 Mill Test Certificates.
Stainless steel hot rolled strip provides the indispensable material balance of structural integrity, formability, and environmental resistance across heavy industries.
| Industrial Sector | Recommended Strip Grade | Key Operational Stress / Requirement | Custom Renzhi Solution |
|---|---|---|---|
| Heavy Industrial Pressure Vessels | 304L, 316L, 310S | Cyclic pressure, elevated heat, intergranular stress corrosion | Continuous hot rolled strip annealed & pickled (No.1) with ultra-low carbon chemistry (<0.030%). |
| Oil & Gas / Marine Equipment | Duplex 2205, Super Duplex 2507 | High chloride pitting, H2S sour gas environments, high mechanical yield | Hot rolled strip with PREN > 35-42, supplying high yield strength for reduced wall thickness & weight. |
| Automotive Exhaust & Chassis | 430, 409L, 304 | Thermal fatigue, cyclic oxidation, cost-optimized mass production | Custom slit hot rolled strip with edge conditioning (rounded/deburred) tailored for robotic tube bending. |
| Architecture & Structural Members | 201, 304 | High yield strength, long-term atmospheric durability, aesthetic appeal | Levelled hot rolled strip with tight flatness tolerances for laser cutting into structural I-beams & channels. |
| Desalination & Chemical Processing | 316L, Duplex 2205 | Continuous brine exposure, acidic fluid handling, erosion-corrosion | Hot rolled slit strip for continuous automated seam welding of fluid transportation pipelines. |
B2B stainless steel purchasing is governed by raw material raw indices (LME Nickel, Ferro-Chrome, Molybdenum), thickness/width extras, surface finishing costs, and international freight dynamics. Below is our baseline benchmark pricelist matrix to assist procurement directors in budget estimation.
Market Price Dynamics Note: Prices for stainless steel hot rolled strips fluctuate based on raw material surcharges. The table below represents estimated FOB Shanghai / Ningbo baseline prices per metric ton (MT) for standard hot rolled strip (Thickness: 2.0mm – 8.0mm | No.1 Finish | Standard Slit Edge). Contact our sales engineers for firm 30-day spot quotations.
| Grade | Thickness Range (mm) | Width Range (mm) | Estimated Indicative Price (USD / Metric Ton) | Min. Order Quantity (MOQ) | Primary Price Drivers |
|---|---|---|---|---|---|
| Grade 201 (HR Strip) | 1.8 – 6.0 mm | 100 – 1250 mm | $1,180 – $1,350 / MT | 3 Metric Tons | Manganese & Copper surcharges |
| Grade 304 (HR Strip) | 2.0 – 8.0 mm | 50 – 1500 mm | $2,150 – $2,400 / MT | 2 Metric Tons | LME Nickel index & Scrap availability |
| Grade 304L (HR Strip) | 2.0 – 8.0 mm | 50 – 1500 mm | $2,200 – $2,450 / MT | 2 Metric Tons | Low-carbon AOD processing extra |
| Grade 316L (HR Strip) | 2.0 – 10.0 mm | 50 – 1500 mm | $3,150 – $3,500 / MT | 2 Metric Tons | Ferro-Molybdenum index & Nickel market |
| Grade 310S (HR Strip) | 3.0 – 10.0 mm | 100 – 1250 mm | $4,200 – $4,800 / MT | 1 Metric Ton | High Nickel (20%) & Chromium (25%) cost |
| Grade 430 (HR Strip) | 2.0 – 6.0 mm | 100 – 1219 mm | $1,250 – $1,450 / MT | 5 Metric Tons | Ferro-Chrome benchmark pricing |
| Duplex 2205 (HR Strip) | 3.0 – 8.0 mm | 100 – 1500 mm | $3,400 – $3,850 / MT | 1 Metric Ton | Molybdenum & Nitrogen thermal treatment |
| Super Duplex 2507 | 3.0 – 8.0 mm | 100 – 1250 mm | $4,600 – $5,200 / MT | 1 Metric Ton | High Molybdenum (4%) & Nickel alloying |
To safeguard international buyers against FX fluctuations and volatile metals markets, Renzhi offers flexible purchasing frameworks including Index-Linked Contract Options, 60-day price lock-ins for scheduled project call-offs, and mixed-container shipments combining hot rolled strip, welded pipe, and cold rolled sheet.
Navigating international trade compliance, tariff codes (HS 7219.13 / 7219.14), and material testing requirements demands an experienced manufacturer with proven export capability.
All hot rolled strip shipments are accompanied by certified EN 10204 3.1 Mill Test Certificates detailing exact heat numbers, melt ladle analysis, heat treatment history, yield/tensile curves, and elongation test records. Third-party inspections by SGS, TÜV, or BV are routinely facilitated.
Strip coils are wrapped in heavy-duty waterproof VCI anti-rust paper, secured with radial and circumferential steel strapping, and mounted on heavy-duty fumigated wooden pallets or eye-to-sky steel cradles designed for breakbulk or 20ft/40ft container ocean freight.
Our international trade desk provides technical support in English, Spanish, Russian, German, and French, assisting EPC contractors and steel service centers with customs tariff optimization, FORM E / Certificate of Origin issuance, and DDP/CIF port logistics.
Explore additional factory-direct stainless steel products, custom slit coils, decorative pipes, and structural plates available for worldwide export.
Answers to fundamental technical, logistical, and commercial inquiries routinely submitted by procurement directors, quality inspectors, and structural engineers.
PREN = %Cr + 3.3(%Mo) + 16(%N). Standard 304 achieves a PREN of ~19, whereas 316L reaches ~25. Duplex 2205 exceeds 35, and Super Duplex 2507 exceeds 42. Overseas buyers operating marine, chemical, or desalination equipment select higher PREN hot rolled strips to guarantee multi-decade equipment service life without localized pitting failure.