Precision-rolled, origin-certified stainless steel coils, sheets, and pipes manufactured to strict ASTM, EN, and JIS standards.
Duplex 2205 stainless steel (UNS S31803 / UNS S32205 / EN 1.4462 / DIN X2CrNiMoN22-5-3) represents a pivotal evolutionary leap in metallurgical engineering. Characterized by a dual-phase microstructure containing approximately equal proportions of ferrite (~50%) and austenite (~50%), 2205 duplex stainless steel coils combine the localized pitting resistance and high tensile strength of ferritic alloys with the exceptional ductility and stress corrosion cracking (SCC) immunity of austenitic grades.
As premier manufacturers operating out of China's advanced steel hub in Wuxi, Jiangsu, Jiangsu Renzhi Holding Group Co., Ltd. leverages state-of-the-art cold-rolling mills, precision slitting lines, and controlled continuous solution annealing to deliver prime 2205 stainless steel coils. Sourced directly from primary mill slabs—including partnerships with industry giants such as Tsingshan, TISCO, POSCO, and Baosteel—our 2205 coils satisfy global engineering demands across marine, oil & gas, chemical processing, and renewable energy infrastructure.
To assist procurement engineers and QA directors in verifying compliance, the following master table compares UNS S31803 / S32205 standard parameters against conventional austenitic alternatives:
| Grade Designation | Chromium (Cr) | Nickel (Ni) | Molybdenum (Mo) | Nitrogen (N) | Yield Strength Rp0.2 (MPa) | Tensile Strength Rm (MPa) | PREN Value |
|---|---|---|---|---|---|---|---|
| 2205 (UNS S32205) | 22.0 – 23.0 % | 4.5 – 6.5 % | 3.0 – 3.5 % | 0.14 – 0.20 % | ≥ 450 | 655 – 880 | ≥ 34 - 36 |
| 2205 (UNS S31803) | 21.0 – 23.0 % | 4.5 – 6.5 % | 2.5 – 3.5 % | 0.08 – 0.20 % | ≥ 450 | 620 – 880 | ≥ 31 - 33 |
| 316L (UNS S31603) | 16.0 – 18.0 % | 10.0 – 14.0 % | 2.0 – 3.0 % | ≤ 0.10 % | ≥ 220 | 515 – 690 | ~ 25 |
| Super Duplex 2507 | 24.0 – 26.0 % | 6.0 – 8.0 % | 3.0 – 5.0 % | 0.24 – 0.32 % | ≥ 550 | 750 – 1000 | ≥ 42 |
*Pitting Resistance Equivalent Number (PREN) calculated via formula: PREN = %Cr + 3.3(%Mo + 0.5%W) + 16(%N).
Analyzing global B2B consumption, structural cost savings, and high-performance applications in severe industrial environments.
Seawater reverse osmosis (SWRO) facilities demand materials capable of surviving high chloride concentrations and aggressive crevice corrosion. 2205 duplex coil provides superior PREN values (≥34) while allowing wall thickness reduction in pressure vessels and piping due to its high yield strength (≥450 MPa).
In sour gas (H2S-containing) oil fields and downstream refining units, hydrogen-induced cracking and stress corrosion cracking present major hazards. Duplex 2205 coils engineered with controlled nitrogen and low carbon ensure long-term integrity in heat exchangers, separators, and storage tanks.
Global logistics fleet operators utilize cold-rolled and hot-rolled 2205 coils for building inland and deep-sea parcel tankers. The dual-phase microstructure allows thinner plate walls, directly expanding payload capacities while resisting aggressive chemical cargoes such as phosphoric and nitric acids.
As the global energy transition accelerates, 2205 coil strip is increasingly specified for biomass digesters, Flue Gas Desulfurization (FGD) scrubbers, and hydrogen transport infrastructure. It offers a balanced cost-to-performance ratio compared to nickel-base alloys like Alloy 625 or 904L.
Producing high-grade 2205 stainless steel coil requires stringent process control during melting, hot rolling, cold reduction, and heat treatment. Unbalanced ferrite-austenite ratios or improper cooling rates can cause precipitation of deleterious intermetallic phases such as sigma (σ), chi (χ), and chromium nitrides between 600°C and 1000°C, drastically impairing impact toughness and pitting corrosion resistance.
Raw materials undergo Argon Oxygen Decarburization (AOD) or Vacuum Oxygen Decarburization (VOD) refining to restrict carbon content strictly below 0.030%. Precise alloying with elemental nitrogen restores austenite stability in heat-affected zones during subsequent customer welding.
To eliminate sigma phase embrittlement, our continuous annealing furnace heats the coil strip to 1040°C–1080°C followed by immediate high-pressure water quenching. This guarantees a clean, 50/50 phase balance verified via metallographic testing per ASTM E562.
Our multi-roll Sendzimir mills ensure ultra-tight thickness tolerances (down to ±0.01mm) across strip widths ranging from 600mm to 1500mm. Perfect flatness and crown control facilitate seamless automatic laser welding or stamping at buyer facilities.
Integrated production lines, mill-traceable raw materials, and certified non-destructive testing for absolute procurement security.
We source prime hot-rolled master coils exclusively from premier Tier-1 steel mills including Tsingshan, TISCO, POSCO, and Baosteel. Every coil heat number is mapped directly to heat chemistry and original Mill Test Certificates (MTC EN 10204 3.1 or 3.2).
Our facility in Huishan District, Wuxi, houses chemical Spectrometers (PMI), Universal Tensile Testers, Hardness Testers (HV/HB), Impact Testing at -40°C, and Intergranular Corrosion Test setups in strict accordance with ASTM A262 Practice E and ASTM G48 Method A.
Whether you require No.1 hot rolled, 2B cold rolled, BA (Bright Annealed), or No.4 brushed strip, our 5 automatic slitting lines and 6 precision polishing lines handle slit widths from 10mm up to 1500mm with burr-free edges.
Protecting steel coil surface integrity across international maritime and multimodal transport routes.
Coils are wrapped in heavy-duty waterproof VCI anti-rust paper, sealed inside plastic film, protected with inner/outer steel edge guards, and secured onto fumigated wooden or steel pallets with high-tensile radial straps (Eye-to-Sky or Eye-to-Side positioning).
All products conform to ISO 9001:2015, ISO 14001, PED 2014/68/EU (Pressure Equipment Directive), REACH, and RoHS directives. We support third-party inspections via SGS, Bureau Veritas (BV), Intertek, or Lloyd's Register.
We provide FOB, CIF, CFR, and DDP solutions backed by multi-lingual sales engineering teams (English, Spanish, Russian, German, Arabic) to ensure clear communication and hassle-free customs clearance.
Direct answers to technical, commercial, and metallurgical queries from procurement officers worldwide.
UNS S32205 is a dual-certified, restricted-chemistry variation of UNS S31803. S32205 specifies higher minimum levels of Chromium (22.0% vs 21.0%), Molybdenum (3.0% vs 2.5%), and Nitrogen (0.14% vs 0.08%). This restricted chemistry guarantees higher pitting corrosion resistance (PREN ≥34 vs ~31) and eliminates susceptibility to intermetallic phase precipitation during welding. All 2205 coils supplied by Jiangsu Renzhi are dual-certified as S31803/S32205.
Duplex 2205 offers approximately double the yield strength of 316L (≥450 MPa vs ≥220 MPa) and substantially higher chloride stress corrosion cracking resistance. Because engineers can design thinner wall sections using 2205 without compromising structural integrity, total project material weight and overall cost are often reduced despite 2205's higher raw material per-ton cost.
We produce cold-rolled 2205 coils in thicknesses from 0.3mm to 3.0mm (widths 600mm to 1500mm) and hot-rolled coils from 3.0mm to 16.0mm. Standard coil inner diameters (ID) are 508mm or 610mm, with custom slit strip widths available down to 10mm.
We strictly enforce continuous bright annealing at temperatures between 1040°C and 1080°C followed by high-velocity water/air quenching. This rapid thermal cooling bypasses the 600°C–1000°C critical precipitation zone, ensuring a balanced 50% ferrite / 50% austenite microstructure per ASTM E562.
Every shipment includes MTC per EN 10204 3.1 (or 3.2 upon request) detailing exact ladle chemical analysis, mechanical tensile/yield/elongation testing, hardness, PMI results, ferrite count, and ASTM A262 Practice E corrosion test compliance.
For standard stock coil sizes, dispatch is available within 7 to 10 business days. Custom cold-rolling or precision slitting orders take approximately 15 to 25 days depending on total tonnage. Our flexible factory MOQ starts as low as 1 to 3 metric tons for standard widths.
From precision strips to heavy industrial welded pipes and specialized alloy plates.
Send us your target dimensions, required quantity, surface finish, and destination port. Our metallurgical engineers will provide a comprehensive price breakdown and MTC technical package within 24 hours.